Used to form internal coatings, manually or by spraying, acting as a protective and decorative means on the following bases: concrete, cement, cement-lime, gypsum plasters, drywalls, thin-layer mineral plasters etc. It can also be used to cover already existing paint coatings for renovation purposes. The product is available in white.
Packaged in containers: 10 l, 5 l.
Actual painting works may commence after a suitable base preparation, and after it has dried off completely. In order to improve the working properties, the Manufacturer allows the addition of max. 5% water to the paint. The volume of added water should be identical for each package. The paint should be stirred directly before the application. Apply one or two layers with a roller or high-pressure spraying device. Works on a wall constituting a single plane should continue non-stop, without breaks, with “wet on wet” method, using material from a single production batch.Show more
The ambient temperature during the paint application and drying should be between +5°C and +30°C. The optimal application temperature is +20°C. Under intensive, highly colour-saturated paints, use a priming paint in a colour recommended by the Manufacturer. Enclosed spaces should be aired until the characteristic smell is removed. Surfaces exposed to contamination with paint should be secured; any stains should be removed before drying.
Information contained in the manual help ensure the optimal use of the product, however, it does not create any legal liability of the Manufacturer, due to the fact that the conditions of use remain outside of its control. We do not accept any responsibility if the material is combined with products from other Manufacturers.