Used in manual preparation of decorative internal coatings or their fragments. The addition of brocade serves as decoration. Can be applied on all typical mineral bases, such as: concrete, cement, cement-lime, lime-cement, lime, gypsum plasters etc., minimum 28 days after they are placed, and on drywalls. Available in colours according to the manufacturer's colour scheme. Upon the customer's request, other colour schemes are available.
Packaged in 30, 15 and 5kg containers.
Only after suitable preparation of the base and when it has completely dried off, the actual plastering works may be commenced. In order to achieve the correct working consistence, it is allowed to add a small amount of water; maximum 1% per package. The mass needs to be well agitated directly before its application. Stainless steel trowel should be used to apply and smoothen the plaster. In order to obtain a homogenous plaster structure, apply the mass at a grain thickness over the entire worked surface, using material from a single production batch. The mass levelling should be made in one direction only. Too strong smoothening may lead to the formation of permanent, grey tarnish on the plaster surface.Show more
The ambient temperature during the plaster application and drying should be between +5°C and +30°C. The optimal application temperature is +20°C. Do not use, when the base temperature is below +5°C. The priming paint colour should be strictly matched with the colour of mosaic plaster, according to recommendations of the manufacturer. During plaster application, the surface needs to be protected against excessive drying. When using in enclosed areas, these should be aired until the characteristic smell disappears. Surfaces exposed to soiling with should be secured, and when soiling occurs, remove stains before they turn dry. Low temperatures or high air humidity will substantially increase the plaster drying time.
Information contained in the manual help ensure the optimal use of the product, however, it does not create any legal liability of the Manufacturer, due to the fact that the conditions of use remain outside of its control. We do not accept any responsibility if the material is combined with products from other Manufacturers.